Industrial Brush Bristles Explained: Nylon, Polypropylene, Tynex, Wire & Brass
The core and the size make a brush fit the machine; the bristle decides whether it does the job. Here's how the common bristles compare and what else to tell us when you order.
1. Synthetic bristles
- Nylon: tough and springy, keeps its shape wet or dry; a good choice for belt cleaning, washing and general industrial brushes
- Polypropylene (PP): light, cheap and resistant to most chemicals and water; the usual bristle for sweeping, washing and road broom wafers
- PET and polyethylene (Mylex): soft, smooth bristles for delicate surfaces such as fruit, glass and solar panels
- Tynex and abrasive nylon: nylon filled with grit, for deburring, scuffing and cleaning without the sparks of wire
2. Metal bristles
- Steel wire: the most aggressive, for removing rust, scale, weld spatter and heavy burrs
- Brass: softer than steel and non-sparking, for cleaning softer metals and threads without scoring them
3. Trim length and density
The shorter the trim, the firmer and more aggressive the brush; a longer trim flexes more and sweeps softer. More tufts packed closer together give a denser, stiffer face. If an old brush did the job well, a worn sample tells us both.
4. Fill pattern
Roller brushes are filled in straight rows, a staggered pattern or a spiral. Staggered and spiral fills give an even, continuous contact; a spiral also helps move material to one side, which suits sweeping and belt cleaning.
5. What to send when you order
- A photo or worn sample of the old brush
- Outside diameter, inside diameter or bore, length or face width, and trim length
- What it works on, whether it runs wet or dry, any chemicals, and the operating speed
- How many you need