How to Measure a Conveyor Belt (Width, Length & Thickness)
Getting the measurements right first time saves a second trip and a stopped line. Here's what to measure and how.
1. Width
Measure the belt from edge to edge across the top. If the belt is gone, measure the face width of the pulley and allow for the edge clearance your conveyor needs.
2. Length
For an endless belt, run a tape around the belt on the conveyor, or mark a start point and measure along it until you're back at the mark. Set the take-up (tensioner) to the middle of its travel first.
If there's no belt to measure, use the centre distance (C) between the pulley shafts and the two pulley diameters (D and d): Length ≈ 2 × C + 1.57 × (D + d). Measure all three in millimetres.
3. Thickness and plies
Measure the thickness at the edge with a vernier or calipers, not a tape. Look at a cut edge to count the fabric layers (plies).
4. Tell us what it carries
- What the belt carries (boxes, wet produce, oily product, loose bulk)
- Whether it runs flat or on an incline
- Whether it touches food
- How it's joined now (endless or lacing)
- A photo of the top surface and a cut edge