Skip to content
Belting &
Agri Supplies

Conveyor Belt Running Off to One Side? How to Fix Belt Tracking

A belt that wanders wears its edges, spills product and eventually damages the frame. Work through these checks in order.

1. Clean first

Product build-up on a pulley or roller makes it bigger on one side, and the belt steers away from it. Clean pulleys, rollers and the underside of the belt before adjusting anything.

2. Check everything is square

The head pulley, tail pulley and rollers must sit at right angles to the frame. A belt moves towards the end of a roller it touches first, so a skewed roller steers it.

3. Even tension

Set both sides of the take-up the same, then make small adjustments on the tail pulley, a quarter turn at a time, letting the belt run a few revolutions between each.

4. Look at the belt itself

  • A joint that isn't square makes the belt snake every time it passes
  • A belt cut off-square, stretched on one edge or curled won't track: replace it
  • Worn or seized rollers drag one side